initial commit

2025-11-29 03:23:13 +01:00 · 2023-01-15 22:57:56 +03:00
commit c8a3e8df32
7 changed files with 513 additions and 0 deletions
@@ -0,0 +1,95 @@
+# syntax=docker/dockerfile:1
+ARG UBUNTU_VERSION=22.04
+FROM ubuntu:${UBUNTU_VERSION} AS builder_i2pd
+ARG I2PD_VERSION=2.45.1
+ARG I2PD_COMPILER=gcc
+RUN DEBIAN_FRONTEND=noninteractive\
+    apt-get update &&\
+    apt-get -y upgrade
+RUN DEBIAN_FRONTEND=noninteractive\
+    apt-get install -y $I2PD_COMPILER
+RUN DEBIAN_FRONTEND=noninteractive\ 
+    apt-get install -y \
+    git \
+    make \
+    cmake \
+    debhelper
+RUN DEBIAN_FRONTEND=noninteractive\ 
+    apt-get install -y \
+    libboost-date-time-dev \
+    libboost-filesystem-dev \
+    libboost-program-options-dev \
+    libboost-system-dev \
+    libssl-dev \
+    zlib1g-dev
+RUN DEBIAN_FRONTEND=noninteractive\ 
+    apt-get install -y \ 
+    libminiupnpc-dev
+WORKDIR /BUILD_I2PD/
+RUN git clone --depth 1 --branch $I2PD_VERSION https://github.com/PurpleI2P/i2pd.git
+WORKDIR /BUILD_I2PD/i2pd/build
+RUN cmake -DCMAKE_BUILD_TYPE=Release -DWITH_AESNI=ON -DWITH_UPNP=ON .
+RUN make
+
+FROM ubuntu:${UBUNTU_VERSION} as builder_yggdrasil
+ARG YGGDRASIL_VERSION=v0.4.7
+RUN DEBIAN_FRONTEND=noninteractive\
+    apt-get update &&\
+    apt-get -y upgrade
+RUN DEBIAN_FRONTEND=noninteractive\
+    apt-get install -y git golang
+WORKDIR /BUILD_YGGDRASIL/
+RUN git clone --depth 1 --branch $YGGDRASIL_VERSION https://github.com/yggdrasil-network/yggdrasil-go.git
+ENV CGO_ENABLED=0
+WORKDIR /BUILD_YGGDRASIL/yggdrasil-go
+RUN ./build
+
+FROM ubuntu:${UBUNTU_VERSION}
+RUN DEBIAN_FRONTEND=noninteractive\
+    apt-get update &&\
+    apt-get -y upgrade
+RUN DEBIAN_FRONTEND=noninteractive\ 
+    apt-get install -y \
+    libboost-date-time-dev \
+    libboost-filesystem-dev \
+    libboost-program-options-dev \
+    libboost-system-dev \
+    libssl3 \
+    zlib1g
+RUN DEBIAN_FRONTEND=noninteractive\ 
+    apt-get install -y \ 
+    libminiupnpc17
+# Ports Used by I2P
+# Webconsole
+EXPOSE 7070
+# HTTP Proxy
+EXPOSE 4444
+# SOCKS Proxy
+EXPOSE 4447
+# SAM Bridge (TCP)
+EXPOSE 7656
+# BOB Bridge
+EXPOSE 2827
+# I2CP
+EXPOSE 7654
+# 7650
+EXPOSE 7650
+# Port to listen for connections
+EXPOSE 10765
+WORKDIR /I2PD/
+COPY --from=builder_i2pd /BUILD_I2PD/i2pd/build/i2pd .
+COPY --from=builder_i2pd /BUILD_I2PD/i2pd/contrib/certificates ./certificates
+COPY i2pd.conf .
+RUN ulimit -n 4096
+# Ports used by YGGDRASIL
+# Listen
+EXPOSE 10654
+# Default yggdrasil port
+EXPOSE 9001
+WORKDIR /YGGDRASIL/
+COPY --from=builder_yggdrasil /BUILD_YGGDRASIL/yggdrasil-go/yggdrasil .
+COPY --from=builder_yggdrasil /BUILD_YGGDRASIL/yggdrasil-go/yggdrasilctl .
+COPY yggdrasil.conf .
+WORKDIR /
+COPY entrypoint.sh .
+CMD ["bash", "/entrypoint.sh"]
@@ -0,0 +1,35 @@
+# I2PD_YGGDRASIL_DOCKER
+
+## Description
+
+This project is a set of tools for building [I2PD](https://i2pd.website/) over [YGGDRASIL](https://yggdrasil-network.github.io/) docker images.
+No clearnet for i2p, only yggdrasil!
+
+## First of all!
+
+Before rest of all you have to make changes in configuration files:
+
+* yggdrasil.conf: fill *Peers* with outbound peer connections, *PublicKey* and *PrivateKey* with generated [keys](https://yggdrasil-network.github.io/configuration.html)
+
+## Building
+
+You can build docker image by simply run script *make_i2pd_yggdrasil_docker_image.sh*. 
+
+> bash make_docker_image.sh
+
+Feel free to modify it with your own building arguments.
+
+## Running
+
+To run docker container just run script *run_i2pd_yggdrasil_docker_image.sh*
+
+> bash run_docker_image.sh
+
+## Deploy
+
+To deploy built image to your host just execute this from command line
+
+> docker save i2pd_yggdrasil:latest | bzip2 | pv | ssh user@host docker load
+> scp run_i2pd_yggdrasil_docker_image.sh user@host:.
+
+## 
@@ -0,0 +1,7 @@
+#!/bin/bash
+sysctl net.ipv6.conf.all.disable_ipv6=0 || true
+/YGGDRASIL/yggdrasil -useconffile /YGGDRASIL/yggdrasil.conf &
+sleep 1m
+/I2PD/i2pd --datadir /I2PD --conf /I2PD/i2pd.conf &
+wait -n
+exit $?
@@ -0,0 +1,279 @@
+## Configuration file for a typical i2pd user
+## See https://i2pd.readthedocs.io/en/latest/user-guide/configuration/
+## for more options you can use in this file.
+
+## Lines that begin with "## " try to explain what's going on. Lines
+## that begin with just "#" are disabled commands: you can enable them
+## by removing the "#" symbol.
+
+## Tunnels config file
+## Default: ~/.i2pd/tunnels.conf or /var/lib/i2pd/tunnels.conf
+# tunconf = /var/lib/i2pd/tunnels.conf
+
+## Tunnels config files path
+## Use that path to store separated tunnels in different config files.
+## Default: ~/.i2pd/tunnels.d or /var/lib/i2pd/tunnels.d
+# tunnelsdir = /var/lib/i2pd/tunnels.d
+
+## Path to certificates used for verifying .su3, families
+## Default: ~/.i2pd/certificates or /var/lib/i2pd/certificates
+# certsdir = /var/lib/i2pd/certificates
+
+## Where to write pidfile (default: i2pd.pid, not used in Windows)
+# pidfile = /run/i2pd.pid
+
+## Logging configuration section
+## By default logs go to stdout with level 'info' and higher
+## For Windows OS by default logs go to file with level 'warn' and higher
+##
+## Logs destination (valid values: stdout, file, syslog)
+##  * stdout - print log entries to stdout
+##  * file - log entries to a file
+##  * syslog - use syslog, see man 3 syslog
+# log = file
+## Path to logfile (default - autodetect)
+# logfile = /var/log/i2pd/i2pd.log
+## Log messages above this level (debug, info, *warn, error, none)
+## If you set it to none, logging will be disabled
+# loglevel = warn
+## Write full CLF-formatted date and time to log (default: write only time)
+# logclftime = true
+
+## Daemon mode. Router will go to background after start. Ignored on Windows
+# daemon = true
+
+## Specify a family, router belongs to (default - none)
+# family =
+
+## Network interface to bind to
+## Updates address4/6 options if they are not set
+# ifname =
+## You can specify different interfaces for IPv4 and IPv6
+# ifname4 =
+# ifname6 =
+
+## Local address to bind transport sockets to
+## Overrides host option if:
+## For ipv4: if ipv4 = true and nat = false
+## For ipv6: if 'host' is not set or ipv4 = true
+# address4 =
+# address6 =
+
+## External IPv4 or IPv6 address to listen for connections
+## By default i2pd sets IP automatically
+## Sets published NTCP2v4/SSUv4 address to 'host' value if nat = true
+## Sets published NTCP2v6/SSUv6 address to 'host' value if ipv4 = false
+# host = 1.2.3.4
+
+## Port to listen for connections
+## By default i2pd picks random port. You MUST pick a random number too,
+## don't just uncomment this
+port = 10765
+
+## Enable communication through ipv4
+ipv4 = false
+## Enable communication through ipv6
+ipv6 = false
+
+## Enable SSU transport (default = true)
+ssu = false
+
+## Bandwidth configuration
+## L limit bandwidth to 32KBs/sec, O - to 256KBs/sec, P - to 2048KBs/sec,
+## X - unlimited
+## Default is L (regular node) and X if floodfill mode enabled. If you want to
+## share more bandwidth without floodfill mode, uncomment that line and adjust
+## value to your possibilities
+# bandwidth = L
+## Max % of bandwidth limit for transit. 0-100. 100 by default
+# share = 100
+
+## Router will not accept transit tunnels, disabling transit traffic completely
+## (default = false)
+# notransit = true
+
+## Router will be floodfill
+## Note: that mode uses much more network connections and CPU!
+floodfill = true
+
+[ntcp2]
+## Enable NTCP2 transport (default = true)
+# enabled = true
+## Publish address in RouterInfo (default = true)
+# published = true
+## Port for incoming connections (default is global port option value)
+# port = 4567
+
+[ssu2]
+## Enable SSU2 transport (default = false for 2.43.0)
+enabled = true
+## Publish address in RouterInfo (default = false for 2.43.0)
+published = true
+## Port for incoming connections (default is global port option value or port + 1 if SSU is enabled)
+# port = 4567
+
+[http]
+## Web Console settings
+## Uncomment and set to 'false' to disable Web Console
+# enabled = true
+## Address and port service will listen on
+address = 0.0.0.0
+port = 7070
+## Path to web console, default "/"
+# webroot = /
+## Uncomment following lines to enable Web Console authentication
+# auth = true
+# user = i2pd
+# pass = changeme
+## Select webconsole language
+## Currently supported english (default), afrikaans, armenian, chinese, french,
+## german, russian, turkmen, ukrainian and uzbek languages
+# lang = english
+hostname = localhost
+#strictheaders = false
+
+[httpproxy]
+## Uncomment and set to 'false' to disable HTTP Proxy
+# enabled = true
+## Address and port service will listen on
+address = 0.0.0.0
+port = 4444
+## Optional keys file for proxy local destination
+# keys = http-proxy-keys.dat
+## Enable address helper for adding .i2p domains with "jump URLs" (default: true)
+# addresshelper = true
+## Address of a proxy server inside I2P, which is used to visit regular Internet
+# outproxy = http://false.i2p
+## httpproxy section also accepts I2CP parameters, like "inbound.length" etc.
+
+[socksproxy]
+## Uncomment and set to 'false' to disable SOCKS Proxy
+# enabled = true
+## Address and port service will listen on
+address = 0.0.0.0
+port = 4447
+## Optional keys file for proxy local destination
+# keys = socks-proxy-keys.dat
+## Socks outproxy. Example below is set to use Tor for all connections except i2p
+## Uncomment and set to 'true' to enable using of SOCKS outproxy
+# outproxy.enabled = false
+## Address and port of outproxy
+# outproxy = 127.0.0.1
+# outproxyport = 9050
+## socksproxy section also accepts I2CP parameters, like "inbound.length" etc.
+
+[sam]
+## Comment or set to 'false' to disable SAM Bridge
+enabled = true
+## Address and port service will listen on
+# address = 127.0.0.1
+# port = 7656
+
+[bob]
+## Uncomment and set to 'true' to enable BOB command channel
+# enabled = false
+## Address and port service will listen on
+# address = 127.0.0.1
+# port = 2827
+
+[i2cp]
+## Uncomment and set to 'true' to enable I2CP protocol
+# enabled = false
+## Address and port service will listen on
+# address = 127.0.0.1
+# port = 7654
+
+[i2pcontrol]
+## Uncomment and set to 'true' to enable I2PControl protocol
+# enabled = false
+## Address and port service will listen on
+# address = 127.0.0.1
+# port = 7650
+## Authentication password. "itoopie" by default
+# password = itoopie
+
+[precomputation]
+## Enable or disable elgamal precomputation table
+## By default, enabled on i386 hosts
+# elgamal = true
+
+[upnp]
+## Enable or disable UPnP: automatic port forwarding (enabled by default in WINDOWS, ANDROID)
+# enabled = false
+## Name i2pd appears in UPnP forwardings list (default = I2Pd)
+# name = I2Pd
+
+[meshnets]
+## Enable connectivity over the Yggdrasil network
+yggdrasil = true
+## You can bind address from your Yggdrasil subnet 300::/64
+## The address must first be added to the network interface
+# yggaddress =
+
+[reseed]
+## Options for bootstrapping into I2P network, aka reseeding
+## Enable or disable reseed data verification.
+verify = true
+## URLs to request reseed data from, separated by comma
+## Default: "mainline" I2P Network reseeds
+# urls = https://reseed.i2p-projekt.de/,https://i2p.mooo.com/netDb/,https://netdb.i2p2.no/
+## Reseed URLs through the Yggdrasil, separated by comma
+# yggurls = http://[324:9de3:fea4:f6ac::ace]:7070/
+## Path to local reseed data file (.su3) for manual reseeding
+# file = /path/to/i2pseeds.su3
+## or HTTPS URL to reseed from
+# file = https://legit-website.com/i2pseeds.su3
+## Path to local ZIP file or HTTPS URL to reseed from
+# zipfile = /path/to/netDb.zip
+## If you run i2pd behind a proxy server, set proxy server for reseeding here
+## Should be http://address:port or socks://address:port
+# proxy = http://127.0.0.1:8118
+## Minimum number of known routers, below which i2pd triggers reseeding. 25 by default
+# threshold = 25
+
+[addressbook]
+## AddressBook subscription URL for initial setup
+## Default: reg.i2p at "mainline" I2P Network
+# defaulturl = http://shx5vqsw7usdaunyzr2qmes2fq37oumybpudrd4jjj4e4vk4uusa.b32.i2p/hosts.txt
+## Optional subscriptions URLs, separated by comma
+# subscriptions = http://reg.i2p/hosts.txt,http://identiguy.i2p/hosts.txt,http://stats.i2p/cgi-bin/newhosts.txt,http://rus.i2p/hosts.txt
+
+[limits]
+## Maximum active transit sessions (default:2500)
+# transittunnels = 2500
+## Limit number of open file descriptors (0 - use system limit)
+# openfiles = 0
+## Maximum size of corefile in Kb (0 - use system limit)
+# coresize = 0
+
+[trust]
+## Enable explicit trust options. false by default
+# enabled = true
+## Make direct I2P connections only to routers in specified Family.
+# family = MyFamily
+## Make direct I2P connections only to routers specified here. Comma separated list of base64 identities.
+# routers =
+## Should we hide our router from other routers? false by default
+# hidden = true
+
+[exploratory]
+## Exploratory tunnels settings with default values
+# inbound.length = 2
+# inbound.quantity = 3
+# outbound.length = 2
+# outbound.quantity = 3
+
+[persist]
+## Save peer profiles on disk (default: true)
+# profiles = true
+## Save full addresses on disk (default: true)
+# addressbook = true
+
+[cpuext]
+## Use CPU AES-NI instructions set when work with cryptography when available (default: true)
+# aesni = true
+## Use CPU AVX instructions set when work with cryptography when available (default: true)
+# avx = true
+## Force usage of CPU instructions set, even if they not found
+## DO NOT TOUCH that option if you really don't know what are you doing!
+# force = false
@@ -0,0 +1,8 @@
+#!/bin/bash
+docker build \
+    --build-arg UBUNTU_VERSION=22.04 \
+    --build-arg I2PD_VERSION=2.45.1 \
+    --build-arg I2PD_COMPILER=gcc \
+    --build-arg YGGDRASIL_VERSION=v0.4.7 \
+    --tag i2pd_yggdrasil:latest \
+    .
@@ -0,0 +1,7 @@
+#!/bin/bash
+docker run --rm -d \
+    --device=/dev/net/tun \
+    -p 2827:2827 -p 4444:4444 -p 4447:4447 -p 7070:7070 -p 7650:7650 -p 7654:7654 -p 7656:7656 -p 10765:10765 \
+    -p 10654:10654 -p 9001:9001 \
+    --cap-add=NET_ADMIN --privileged \
+    i2pd_yggdrasil:latest
@@ -0,0 +1,82 @@
+{
+  # List of connection strings for outbound peer connections in URI format,
+  # e.g. tls://a.b.c.d:e or socks://a.b.c.d:e/f.g.h.i:j. These connections
+  # will obey the operating system routing table, therefore you should
+  # use this section when you may connect via different interfaces.
+  Peers: [!!!CHANGE_ME!!!]
+
+  # List of connection strings for outbound peer connections in URI format,
+  # arranged by source interface, e.g. { "eth0": [ "tls://a.b.c.d:e" ] }.
+  # Note that SOCKS peerings will NOT be affected by this option and should
+  # go in the "Peers" section instead.
+  InterfacePeers: {}
+
+  # Listen addresses for incoming connections. You will need to add
+  # listeners in order to accept incoming peerings from non-local nodes.
+  # Multicast peer discovery will work regardless of any listeners set
+  # here. Each listener should be specified in URI format as above, e.g.
+  # tls://0.0.0.0:0 or tls://[::]:0 to listen on all interfaces.
+  Listen: [
+    tls://[::]:10654
+  ]
+
+  # Listen address for admin connections. Default is to listen for local
+  # connections either on TCP/9001 or a UNIX socket depending on your
+  # platform. Use this value for yggdrasilctl -endpoint=X. To disable
+  # the admin socket, use the value "none" instead.
+  AdminListen: unix:///var/run/yggdrasil.sock
+
+  # Configuration for which interfaces multicast peer discovery should be
+  # enabled on. Each entry in the list should be a json object which may
+  # contain Regex, Beacon, Listen, and Port. Regex is a regular expression
+  # which is matched against an interface name, and interfaces use the
+  # first configuration that they match gainst. Beacon configures whether
+  # or not the node should send link-local multicast beacons to advertise
+  # their presence, while listening for incoming connections on Port.
+  # Listen controls whether or not the node listens for multicast beacons
+  # and opens outgoing connections.
+  MulticastInterfaces:
+  [
+    {
+      Regex: .*
+      Beacon: true
+      Listen: true
+      Port: 0
+      Priority: 0
+    }
+  ]
+
+  # List of peer public keys to allow incoming peering connections
+  # from. If left empty/undefined then all connections will be allowed
+  # by default. This does not affect outgoing peerings, nor does it
+  # affect link-local peers discovered via multicast.
+  AllowedPublicKeys: []
+
+  # Your public key. Your peers may ask you for this to put
+  # into their AllowedPublicKeys configuration.
+  PublicKey: !!!CHANGE_ME!!!
+
+  # Your private key. DO NOT share this with anyone!
+  PrivateKey: !!!CHANGE_ME!!!
+
+  # Local network interface name for TUN adapter, or "auto" to select
+  # an interface automatically, or "none" to run without TUN.
+  IfName: auto
+
+  # Maximum Transmission Unit (MTU) size for your local TUN interface.
+  # Default is the largest supported size for your platform. The lowest
+  # possible value is 1280.
+  IfMTU: 65535
+
+  # By default, nodeinfo contains some defaults including the platform,
+  # architecture and Yggdrasil version. These can help when surveying
+  # the network and diagnosing network routing problems. Enabling
+  # nodeinfo privacy prevents this, so that only items specified in
+  # "NodeInfo" are sent back if specified.
+  NodeInfoPrivacy: false
+
+  # Optional node info. This must be a { "key": "value", ... } map
+  # or set as null. This is entirely optional but, if set, is visible
+  # to the whole network on request.
+  NodeInfo: {}
+}