tl;dr We were not counting cells flying from the client to the service, but we
were counting cells flying from the service to the client.
When a rendezvous cell arrives from the client to the RP, the RP forwards it to
the service.
For this to happen, the cell first passes through command_process_relay_cell()
which normally does the statistics counting. However because the `rend_circ`
circuit was not flagged with `circuit_carries_hs_traffic_stats` in
rend_mid_rendezvous(), the cell is not counted there.
Then the cell goes to circuit_receive_relay_cell() which has a special code
block based on `rend_splice` specifically for rendezvous cells, and the cell
gets directly passed to `rend_circ` via a direct call to
circuit_receive_relay_cell(). The cell never passes through
command_process_relay_cell() ever again and hence is never counted by our
rephist module.
The fix here is to flag the `rend_circ` circuit with
`circuit_carries_hs_traffic_stats` so that the cell is counted as soon as it
hits command_process_relay_cell().
Furthermore we avoid double-counting cells since the special code block of
circuit_receive_relay_cell() makes us count rendezvous cells only as they enter
the RP and not as they exit it.
Fixes#40117.
This is not actually a bug! It can happen for a bunch of reasons,
which all boil down to "trying to add an extrainfo for which we no
longer have the corresponding routerinfo".
Fixes#16016; bugfix on 0.2.6.3-alpha.
Resume being willing to use preemptively-built circuits when
UseEntryGuards is set to 0. We accidentally disabled this feature with
that config setting (in our fix for #24469), leading to slower load times.
Fixes bug 34303; bugfix on 0.3.3.2-alpha.
GCC added an implicit-fallthrough warning a while back, where it
would complain if you had a nontrivial "case:" block that didn't end
with break, return, or something like that. Clang recently added
the same thing.
GCC, however, would let you annotate a fall-through as intended by
any of various magic "/* fall through */" comments. Clang, however,
only seems to like "__attribute__((fallthrough))". Fortunately, GCC
accepts that too.
A previous commit in this branch defined a FALLTHROUGH macro to do
the right thing if GNUC is defined; here we replace all of our "fall
through" comments with uses of that macro.
This is an automated commit, made with the following perl one-liner:
#!/usr/bin/perl -i -p
s#/\* *falls? ?thr.*?\*/#FALLTHROUGH;#i;
Given that ed25519 public key validity checks are usually not needed
and (so far) they are only necessary for onion addesses in the Tor
protocol, we decided to fix this specific bug instance without
modifying the rest of the codebase (see below for other fix
approaches).
In our minimal fix we check that the pubkey in
hs_service_add_ephemeral() is valid and error out otherwise.
This patch ensures that we always lowercase the BridgeDistribution from
torrc in descriptors before submitting it.
See: https://bugs.torproject.org/32753
hs_client_purge_state() and hs_cache_clean_as_client() can remove a descriptor
from the client cache with a NEWNYM or simply when the descriptor expires.
Which means that for an INTRO circuit being established during that time, once
it opens, we lookup the descriptor to get the IP object but hey surprised, no
more descriptor.
The approach here is minimalist that is accept the race and close the circuit
since we can not continue. Before that, the circuit would stay opened and the
client wait the SockTimeout.
Fixers #28970.
Signed-off-by: David Goulet <dgoulet@torproject.org>
When encoding introduction points, we were not checking if that intro points
had an established circuit.
When botting up, the service will pick, by default, 3 + 2 intro points and the
first 3 that establish, we use them and upload the descriptor.
However, the intro point is removed from the service descriptor list only when
the circuit has opened and we see that we have already enough intro points, it
is then removed.
But it is possible that the service establishes 3 intro points successfully
before the other(s) have even opened yet.
This lead to the service encoding extra intro points in the descriptor even
though the circuit is not opened or might never establish (#31561).
Fixes#31548
Signed-off-by: David Goulet <dgoulet@torproject.org>
Our dimap code asserts if you try to add the same key twice; this
can't happen if everything is running smoothly, but it's possible if
you try to start a relay where secret_onion_key_ntor is the same as
secret_onion_key_ntor.old.
Fixes bug 30916; bugfix on 0.2.4.8-alpha when ntor keys were
introduced.
When tor is missing descriptors for some primary entry guards, make the
log message less alarming. It's normal for descriptors to expire, as long
as tor fetches new ones soon after.
Fixes bug 31657; bugfix on 0.3.3.1-alpha.
Previously, v3 single onion services failed when all intro nodes were
unreachable via a 1-hop path. Now, we select intros that are only available
via a 3-hop path, and use a 3-hop path to connect to them.
Fixes bug 23507; bugfix on 0.3.2.1-alpha.
Previously, we used a 1-hop path when a single onion rend failed
immediately, and a 3-hop path when it failed after trying to build
a circuit.
Fixes bug 23818; bugfix on 0.3.2.1-alpha.
There is other code that uses this value, and some of it is
apparently reachable from inside router_dir_info_changed(), which
routerlist_free() apparently calls. (ouch!) This is a minimal fix
to try to resolve the issue without causing other problems.
Fixes bug 31003. I'm calling this a bugfix on 0.1.2.2-alpha, where
the call to router_dir_info_changed() was added to routerlist_free().
When we consider all circuits in "waiting for guard" state to be promoted to
an "open" state, we were considering all circuits, even the one marked for
close.
This ultiamtely triggers a "circuit_has_opened()" called on the circuit that
is marked for close which then leads to possible undesirable behaviors within
a subsystem.
For instance, the HS subsystem would be unable to find the authentication key
of the introduction point circuit leading to a BUG() warning and a duplicate
mark for close on the circuit.
This commit also adds a unit test to make sure we never select marked for
close circuits when upgrading its guard state from waiting for guard to open.
Fixes#30871
Signed-off-by: David Goulet <dgoulet@torproject.org>
When this function was implemented, it counted all the entry guards
in the bridge set. But this included previously configured bridges,
as well as currently configured ones! Instead, only count the
_filtered_ bridges (ones that are configured and possibly reachable)
as maybe usable.
Fixes bug 29875; bugfix on 0.3.0.1-alpha.
Previously we purged it in 1-hour increments -- but one-hour is the
maximum TTL for the cache! Now we do it in 25%-TTL increments.
Fixes bug 29617; bugfix on 0.3.5.1-alpha.
Fortunately, in 0.3.5.1-alpha we improved logging for various
failure cases involved with onion service client auth.
Unfortunately, for this one, we freed the file right before logging
its name.
Fortunately, tor_free() sets its pointer to NULL, so we didn't have
a use-after-free bug.
Unfortunately, passing NULL to %s is not defined.
Fortunately, GCC 9.1.1 caught the issue!
Unfortunately, nobody has actually tried building Tor with GCC 9.1.1
before. Or if they had, they didn't report the warning.
Fixes bug 30475; bugfix on 0.3.5.1-alpha.
George Kadianakis
Nick Mathewson
Alexander Færøy
Roger Dingledine
David Goulet
teor
rl1987